How many lumens for a fluorescent tube?

Lumens. Fluorescent lights produce between 50 and 100 lumens per watt . By comparison, LEDs can produce roughly 130 lumens per watt.

How do I know what size fluorescent tube I need?

In order to identify which size you need, the easiest way to tell is to read the label near the base of the tube . If this information is no longer legible, you can measure the bulb's diameter. Fluorescent tubes are measured in eighths of an inch.

How many lumens is a 4 foot 40 watt fluorescent bulb?

A 40-watt fluorescent tube, for example, is rated around 2300 lumens . To replace it with the same intensity LED, look for one that rates around 2300 lumens.

Which fluorescent tube is brightest?

T5s are fluorescent tubes that are 5/8 of an inch in diameter. These are the newest development in the fluorescent family. Although they are the smallest, they are the most energy efficient and brightest. In fact, some T5s last up to 90,000 hours.

What is the LED equivalent to a 5ft fluorescent tube?

Simply remove your power-hungry 58W 5ft fluorescent tube, replace it with this 24W LED equivalent and you can begin to benefit from substantially reduced lighting costs almost immediately. No warping, no bending. Replaces 58W fluorescent tube but consumes only 24W of power.

How many lumens is a 36W fluorescent tube?

Philips T8 36W Fluorescent Tube 4000K 3250 lumen .

How many lumens does a 32W T8 have?

Lumen outputs can vary per 4' fluorescent bulb depending on the type, wattage and manufacture. In reality though, most people are looking for a cheap $2.50 bulb or even less. Average initial “new” lumens (out of the package) for a 32 watt bulb at 3500k color temperature is 2850 .

How many lumens does a 60-watt fluorescent bulb produce?

Wattage of Fluorescent Tube Bulb Type Incandescent CFL 500-700 Lumens 60 Watts 11 Watts 700-1000 Lumens 75 Watts 15 Watts 1000-1250 Lumens 120 Watts 20 Watts 1250-2000 Lumens 150-250 Watts 20 Watts 2 more rows Jan 24, 2023

Is it worth replacing fluorescent tubes with LED?

Compared to fluorescent bulbs, LED lights are up to 80% more efficient . Unlike fluorescent lights, LED lights convert 95% of their energy into light and only 5% is wasted as heat; this is all while still using far less power to provide a strong and consistent output at a lower wattage.

Can I replace my fluorescent tubes with LED tubes?

In general, you can replace fluorescent tubes with LEDs anywhere, as long as you pay attention to the right replacement . Because from the external appearance, the two light sources are very similar. You can find mechanically suitable LED tube for all types of fluorescent tubes.

What is better than fluorescent?

LEDs also offer better dimming performance than fluorescent lamps . They have faster ramp-up to full brightness and are more energy-efficient at low dimming levels. In addition, LEDs do not contain mercury.

What is the LED equivalent of a fluorescent tube?

LED equivalents to fluorescent tube lights Fluorescent Tube Light Wattage LED Equivalent Wattage 70 Watt 24 Watt 58 Watt 22 Watt 35 Watt 18 Watt 20 Watt 9 Watt Mar 9, 2018

What is the lumen output of a T12 fluorescent lamp?

A standard T12 lamp has a life of 20,000 hours and a lumen output of around 2500 lumens . The lumens per watt of T12 is roughly around 60 and a CRI of 70.

Fluorescent Tube Lumens Chart: Your Guide to Types and Sizes (2024)

Navigating the world of lighting can sometimes feel like finding your way through a labyrinth in the dark. We’re here to shed some light on the subject, specifically focusing on fluorescent tubes. It’s not just about the size or type of the tube—it’s also about the lumens, a measure of the total amount of visible light emitted.

With the help of a fluorescent tube lumens chart, you can make more informed decisions about the best lighting solutions for your needs. Stick with us as we illuminate the details of this handy tool and enlighten your understanding of how lighting works.

Key Takeaways

Fluorescent tubes are a versatile and energy-efficient lighting solution for various spaces.
Lumens, not watts, should be used to determine a light’s brightness.
Different types and sizes of fluorescent tubes offer varying lumen outputs for different lighting needs.
Factors such as space, application, color temperature, and energy efficiency should be considered when choosing the right fluorescent tube.

Understanding Fluorescent Tubes and Their Applications

Fluorescent Tube Lumens Chart: Your Guide to Types and Sizes (1)

Diving into the world of fluorescent tubes, we discover their unique advantages and diverse applications. From providing general light in homes and offices to energy-efficient task and accent lighting, these innovative solutions offer more than just illumination. They reduce our carbon footprint significantly, a major benefit in our increasingly eco-conscious world.

Fluorescent tubes are versatile. For instance, T8 fluorescent tubes are ideal for general lighting in homes and offices, offering bright, consistent light perfect for workspaces or living areas. However, there’s more to fluorescent lighting than just general illumination. T5 fluorescent tubes are perfect for task and accent lighting, focusing light on specific areas such as kitchen countertops or display shelves.

Lastly, Compact Fluorescent Lamps (CFLs) take energy efficiency to the next level, offering a long lifespan and significant energy savings.

In essence, whether for general, task, or accent lighting, there’s a type and size of fluorescent tube just right for your needs.

Exploring the Importance of Lumens in Lighting

Fluorescent Tube Lumens Chart: Your Guide to Types and Sizes (2)

As we delve into lumens, it’s crucial to understand that this measure, not watts, truly determines a light’s brightness. Lumens provide a more accurate measure of how much light a bulb produces, revolutionizing the way we perceive and use lights.

Understanding the importance of lumens becomes easier when related to energy efficiency. While watts measure energy consumption, lumens gauge the actual light output. A fluorescent tube lumens chart serves as an invaluable guide in this aspect, helping to select the right bulb according to the desired brightness and energy efficiency.

The chart, detailing types and sizes, helps us to compare different lighting options accurately. It is especially useful for fluorescent tubes, given their wide range of sizes and brightness levels. Lumens have thus become a beacon of light in our quest for better, more efficient lighting solutions.

Different Types of Fluorescent Tubes and Their Lumens

Fluorescent Tube Lumens Chart: Your Guide to Types and Sizes (3)

Let’s now explore the different types of fluorescent tubes and their respective lumen outputs to better understand how they cater to varying lighting needs. Our fluorescent tube lumens chart will be your guide through the complex world of lighting technology.

Firstly, let’s discuss the T8 fluorescent tubes. These tubes are popular for their high lumen output, providing bright, general lighting that can illuminate large spaces effectively. What’s more, they offer energy-efficient options with varying lumen levels, allowing for a more tailored approach to lighting solutions.

Next, we’ve the versatile T5 fluorescent tubes. These tubes have different lumen outputs, making them suitable for task lighting and accent lighting needs. They’re a favorite in spaces where specific lighting intensity is required, providing the perfect balance between brightness and energy efficiency.

Factors to Consider When Choosing the Right Fluorescent Tube

Fluorescent Tube Lumens Chart: Your Guide to Types and Sizes (4)

When choosing the right fluorescent tube, key factors such as the space and its application, color temperature, and energy efficiency should be considered. These factors guide you in determining the proper types and sizes of fluorescent tubes that best fit your needs.

The space and its application dictate the amount of light required. Color temperature, on the other hand, plays a significant role in setting the ambiance of the space. Energy efficiency must not be overlooked either—the initial cost might be higher for energy-efficient tubes, but the long-term savings on energy bills and the environmental impact make it a worthwhile investment.

Here’s a quick guide to help you visualize these factors:

Factor	Consideration	Impact
Space and Application	Size and purpose of space	Determines tube size and lumens required
Color Temperature	Desired ambiance	Dictates the color of light
Energy Efficiency	Long-term savings and environmental impact	Influences initial cost and sustainability

How Do Lumens and Battery Weight Affect Everyday Devices?

When looking for handy info for devices, it’s important to consider how lumens and battery weight can affect everyday use. Lumens impact the brightness of a device, while heavy batteries can make it cumbersome to carry around. Understanding these factors can help consumers make more informed choices.

Using a Fluorescent Tube Lumens Chart for Decision-Making

Fluorescent Tube Lumens Chart: Your Guide to Types and Sizes (5)

Navigatig a fluorescent tube lumens chart can significantly streamline your decision-making process when selecting the ideal lighting solution for your space. To use the chart, we first identify the fixture’s wattage, which directly impacts the light output. Each type and size of fluorescent tube has a specific lumens-per-watt ratio, indicating the amount of light produced for each unit of power consumed. The higher this ratio, the more energy-efficient the tube is.

Next, we consider the desired brightness level for our space. By cross-referencing the lumens-per-watt ratio with the total light output in lumens, we can determine which tube type and size will deliver the required brightness at the most efficient energy consumption level. This step ensures that the chosen tube will provide ample lighting without incurring unnecessary energy costs.

A fluorescent tube lumens chart is more than just a technical guide—it’s a tool for innovation, respecting the environment while meeting our needs.

Conclusion

We’ve explored the world of fluorescent tubes, emphasizing the importance of lumens. We’ve discussed different types and their respective lumens, and what to consider when choosing the right tube. Utilizing a fluorescent tube lumens chart can make your decision-making easier and more informed.

Remember, it’s not just about brightness, but also efficiency and suitability for your space. Light up your world the right way with the perfect fluorescent tube!

Frequently Asked Questions

What are fluorescent tube lumens?

Fluorescent tube lumens refer to the measurement of the total quantity of visible light emitted by a light source, generally measured in lumens per watt. It is an important criterion for gauging the brightness of fluorescent tubes.

Are there different types of fluorescent tubes available?

Yes, there are various types of fluorescent tubes available, such as T8 and T5 tubes. Each type has different sizes, wattages, and lumens output, making them suitable for different applications.

What is the difference between T8 and T5 fluorescent tubes?

T8 and T5 tubes differ in diameter, with T5 tubes being smaller in diameter compared to T8 tubes. T5 tubes are also more energy-efficient and typically have a higher lumen output per watt compared to T8 tubes.

Can I replace my older fluorescent tubes with LED tubes?

Yes, you can replace older fluorescent tubes with LED tubes. LED tubes offer excellent energy efficiency, longer lifespan, and better light quality, making them a popular choice for retrofitting existing fluorescent fixtures.

Do fluorescent tubes contain hazardous materials like mercury?

Yes, fluorescent tubes usually contain a small amount of mercury and should be properly disposed of to prevent environmental contamination. LED tubes, on the other hand, do not contain any hazardous materials.